What is EcoSave?
EcoSave acts as a catalyst to accelerate the burn rate within the combustion chamber. The ingredients place a fine protective film or coating over the metal surfaces (thermally-derived oxidation) on the hot surfaces at the time of combustion. As the fuel in the combustion chamber burns more efficiently it also improves toxic emissions (like Nitrogen Oxide), fuel economy, and power.

How do I know EcoSave is working and when will I see results?

You should generally notice an improvement within 2000 miles of consistent usage. Please note that this varies based upon the condition of your engine.

EcoSave acts as a catalyst in the combustion chamber. EcoSave will remove deposits over time and consistent usage. It may take 2-6 tanks of fuel to remove deposits and improve mileage. Each vehicle/engine is different based upon the engine itself, driving patterns, age of the vehicle etc.

Check your engine oil. With consistent use of EcoSave your engine oil will stay cleaner, longer. The amount of engine deposit will impact the time line to notice the improvement in the oil.

Have an emission test done at the start of using the EcoSave tablet. Have your car re-tested monthly for 3-4 months. Retain your reports and compare the decrease in toxic emissions such NO2 or SO2.

Is EcoSave a fuel additive?
EcoSave uses the fuel as a carrier to the combustion chamber. In the combustion chamber, EcoSave is a catalyst that improves the fuel burn in the chamber and reduces the amount of afterburn (burn outside of the combustion chamber where it has no value for engine performance, wastes gas, and increases emissions). The increased burn in the combustion gives you lower emissions, better gas mileage, and better fuel economy.

Why should I use EcoSave?
EcoSave has been proven to:
• Increase gas mileage
• Reduce harmful emissions
• Boost the octane fuel rating
• Improve performance

Does EcoSave help the environment?
EcoSave reduces emissions from the engine, including carbon monoxide, hydrocarbons, and nitrogen oxide.

Has EcoSave been well tested?
EcoSave has been extensively tested in both road and laboratory settings. Additionally, ferrocene, the organic metallic, has been used in rocket fuels since the 1970s. Please refer to the research page for more technical explanations.

Is EcoSave harmful to my engine?
EcoSave will not harm the engine, catalytic converter, fuel pump, or fuel system. In fact, EcoSave is helpful to an engine as it reduces carbon buildup and other deposits in the combustion chamber.

What type of fuel can be used with EcoSave?
EcoSave works with all grades of gasoline, diesel fuel, bio-diesel fuel, and ethanol-gasoline blends. Low octane fuels (lower grade fuels) show the most noticeable improvement with EcoSave.

How often should I use EcoSave?
For maximum benefit, use EcoSave with each fill up. One tablet treats 15 gallons of gasoline.

Where else can EcoSave be used?
EcoSave can be used in any gasoline, diesel fuel, bio-diesel fuel, and ethanol-gasoline blend engines; such as boats, heavy equipment, farm equipment, and other power equipment including generators, etc. One EcoSave tablet treats approximately 15 gallons of fuel.

Is EcoSave harmful?
No, wipe your hands after touching the tablet.

Will EcoSave work in my old or classic cars?
Yes. EcoSave will work in any combustion engine – old or new.